MoTeC PDM30 - Manual (Page 56)

MoTeC Appendices 53
Selecting an Item in a Window
To access the various items in a window, press ALT + the key for the
underlined letter of the item of interest, e.g.
to select ‘Polarity’ press ALT + P
Alternatively use the TAB key to move through the dialog box (use SHIFT +
TAB to move backwards). The selected control is usually indicated by a
dotted line around it, or by highlighting the text or item selected within the
control.
Using the Selected Item
The method of using the selected item (or control) depends on the type of
control. The common controls are detailed below:
Check Box
A check box is used to tick on or off a particular option.
Press ALT + the key for the underlined letter, or use the TAB key to navigate
to the Check Box. To select, press SPACEBAR.