Carolina 25X Electric Pressure Steam Sterilizer - Manual (Page 12)

WISCONSIN ALUMINUM FOUNDRY CO., INC.
CORRESPONDENCE:
WISCONSIN ALUMINUM FOUNDRY CO., INC.
P.O. BOX 246
MANITOWOC, WISCONSIN 54221-0246
PHONE: (920) 682-8627
FAX: (920) 682-4090
[email protected]
RETURN & SERVICE:
WISCONSIN ALUMINUM FOUNDRY CO., INC.
CONSUMER PRODUCTS DIVISION
1931 SOUTH 14TH STREET
MANITOWOC, WI 54220
ALL-AMERICAN PRESSURE STEAM STERILIZER LIMITED WARRANTY
This quality sterilizer is designed and manufactured to provide many years of satisfactory performance under normal use. Wisconsin Aluminum
Foundry pledges to the original owner that should there be any defects in material or workmanship during the first year after purchase, we will
repair or replace it at our option. This pledge does not apply to damage caused by shipping. To obtain service under the warranty:
1. A Return Authorization (RA) Number is required by our company to return any product manufactured by Wisconsin Aluminum Foundry.
Merchandise returned without an RA Number will be refused. To obtain an RA Number contact our company by either writing, faxing or calling
our Customer Service Department at 920-682-8627. All defective merchandise must be returned to our factory before credit or a replacement
will be issued; do not destroy the defective merchandise. Any products returned must include paperwork stating the reason for the return,
when and where the item(s) were purchased, model numbers, quantities, etc., and who to contact with any questions. Prior to return to the
factory, all sterilizers must be cleaned to remove any biological material or contaminants.
2. Return sterilizer, shipping prepaid, direct to:
Wisconsin Aluminum Foundry Co., Inc.
Consumer Products Division
1931 South 14th Street
Manitowoc, WI 54220
IMPORTANT — PLEASE READ
Any alterations, modifications or changes of any type made to the sterilizer or to any component thereof will void this warranty!
We want you to obtain maximum performance from using this quality sterilizer and we ask that you take the time to read and follow the operating
instructions. Failure to follow instructions, damage caused by improper replacement parts, abuse, or misuse will void this pledge. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state. This is Wisconsin Aluminum Foundry's
personal pledge to you and is being made in place of all other express warranties.
RETURN/SERVICE
Should the pressure sterilizer ever be dropped, the unit must be examined to determine if any damage has occurred. We recommend
the unit be returned to our factory to be thoroughly checked inside and out for any damage. Prior to return to the factory, all sterilizers
must be cleaned to remove any biological material or contaminants. We will examine the entire unit, including the control valve and
gauge, and determine if the unit has sustained damage, and notify you of our findings.
A Return Authorization (RA) Number is required by our company to return any product manufactured by Wisconsin Aluminum
Foundry. Merchandise returned without an RA Number will be refused. To obtain an RA Number contact our company by either
writing, faxing or calling our Customer Service Department at 920-682-8627. All defective merchandise must be returned to our
factory before credit or a replacement will be issued; do not destroy the defective merchandise. Any products returned must include
paperwork stating the reason for the return, when and where the item(s) were purchased, model numbers, quantities, etc., and who to
contact with any questions. If the product is found to be defective, we will either send a replacement or issue full credit, and we will
reimburse you for the return shipping charges. If product is not defective, we will contact you with repair charges, or issue credit, less
our 20% restocking fee.
Should you have any questions at all about the operation of your ALL-AMERICAN Pressure Sterilizer, please write the Consumer
Products Division, and we will promptly answer your questions.
To order any replacement parts, please refer to the parts price list. If you do not have a copy of our current parts price list, you may
write the company and one will be forwarded to you by return mail.