Castle AT-5 - Manual (Page 10)

3.3 Worktop Installation
1. Using the (18) #10 X 2-1/2” pan Phillips sheet
metal screws [F10212] fasten the table down
through the rear of the frame.
Fig 4
2. Place a sheet of plywood measuring AT LEAST
4x5 on the table, and rest it on the bottom fence.
Fig 5
3. Push up on the end of the fence opposite the end with the tight bolts until the fence is
flush with the wood. Now tighten all of the bolts for the fences.
CASTLE, INC AT‐5 OWNERS MANUAL V2.1 Page 10 of 26