Castle AT-5 - Manual (Page 9)

CASTLE, INC AT‐5 OWNERS MANUAL V2.1 Page 9 of 26
10. Roll the assembly onto the legs by rolling it first over the top tube, then onto the leg
11.
3.2 Fence Installation
backs, and finally up and into a fully upright position.
Check that all the leg braces and bolts are securely tightened.
1. Attach the fences using the ¼-20 Flat Head bolts [F44134] , aluminum spacers [N00345
and N00346] and the ¼-20 Kep Nuts [F01422] . The side fence uses the small spacers
and the bottom fence uses the larger spacers.
Caution: When fastening the fences be sure to onl
Fig 2 Fig 3
y tighten one bolt on each
fence at the bottom left corner of the frame. You will tighten the rest later.