J&M TF215 - Manual (Page 9)

Pg. 9
SET-UP INSTRUCTIONS
The J&M Torsion-Flex Soil Conditioner is shipped with components partially assembled. Hardware
required to connect the Base Wheel Assembly, Main Base Frame Assembly, Wing Frames and Tongue
Assembly should already be secured to the components at the point of attachment.
The hydraulic cylinders have the fittings already installed and are secured to the base wheel assembly.
The hydraulic hoses and light harness wires should inserted into the component tubing and simply require
the ends to be connected.
Each basket frame should have the rolling baskets and torsion flex arm installed. Refer to the Basket
Size and Layout, located on the right side of the chart on page 5 of the Operator’s Manual for
recommended basket layout. Be sure the baskets with the 3” x 3” Torsion Bars are secure to the Main
Base Unit and the baskets with the smaller 2 1/2” x 2 1/2” Torsion Bars are secured to the side wings.
The optional Lift Assist Bundle (wing wheels) and Harrow are also shipped partially assembled. Refer to
the Set-Up Instructions on the following pages for installation.