Adaptec USB2connect Host Bus Adapter - Manual (Page 11)

6
USB2connect User’s Guide
Installing the Windows
Drivers
Once the USB2connect is installed in your computer, complete the
following steps as appropriate for your operating system to install a
software driver for the adapter.
Note: It is important that you complete the New Hardware
Wizard for your operating system if it appears, even though
there is currently no driver available for USB 2.0 devices.
Otherwise the wizard may open each time you start your
computer.
Windows Me
1 Power up the computer. During the operating system startup,
Windows Me will automatically detect and load drivers for the
adapter.
Note: It may take longer than usual for your system to
restart, as the operating system is locating and installing the
new drivers.