Adaptec USB2connect Host Bus Adapter - Manual (Page 17)

12
USB2connect User’s Guide
6 To verify that the driver is installed under the Universal Serial
Bus Host Controller section, right-click My Computer, select
Properties,
then select the Hardware tab. To open the Device
Manager, click the Device Manager button.
Note: Under the Other devices section, a yellow ! appears
before Universal Serial Bus (USB Controller) because at this
writing there is no 2.0 driver for the USB2connect. However,
the USB 1.1 drivers included with the Windows 2000 system
are compatible with USB2connect. For updated driver
information, check the Adaptec Web site at
http://www.adaptec.com
.
USB2.0
unction–see
note below
USB1.1 drivers
for the
USB2conncect