Adaptec USB2connect Host Bus Adapter - Manual (Page 22)

17
Installing the Windows Drivers
11 To verify that the drivers are installed under the Universal
Serial Bus Host Controller section, right-click My Computer,
select Properties, and then select the Device Manager tab.
Note: Under Other devices, a yellow ! appears before PCI
Universal Serial Bus if there is no 2.0 driver for
USB2connect. However, the USB 1.1 drivers included with
the Windows 98 SE system are compatible with
USB2connect. For updated driver information, check the
Adaptec Web site at http://www.adaptec.com.
USB1.1 drivers
for the
USB2connect
USB2.0 function;
see Note below