Hunter 28788 52 Maribel - Manual (Page 13)

13
7-7. Install the included CFL bulb.
7-8. Align the posts on the globe assembly with the holes in the shroud.
Make sure that the chain holes in the globe assembly also line up
with the chain holes in the shroud.
7-9. Lift the globe and posts until the threaded end of the posts are
visible through the shroud.
7-10. Install the three acorn nuts onto the posts so that the light kit is
secured to the shroud.
7-11. Feed the chains from the fan and the light switch down through
the holes in the shroud.
7-12. Attach the pull chain pendants to the light and fan pull chains
using the breakaway connector. (You may find the breakaway
connector on the end of the pull chain.)
Step 7-7
Steps 7-8 – 7-10
7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Post
Shroud
Chain
Hole
Acorn
Nut
Breakaway
Connector
Bulb
Step 7-12 Step 7-11
42467-01 • 11/26/12 • Hunter Fan Company