Hunter 28788 52 Maribel - Manual (Page 15)

15
8-1. Turn on electrical power to the fan.
8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence:
High, Medium, Low and Off.
• Pull the chain slowly to change settings.
• Release slowly to prevent the chain from recoiling into the blades.
• The chain uses a breakaway connector that separates if the chain is jerked. If this
happens, simply reinsert the chain into the connector.
8-3. The blades on this fan have been treated with Hunter’s Dust Armor protection, making
the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth
to clean the blades. Do not use a furniture polish or any other cleaners that leave any
residue, as they will damage the protective Dust Armor on the blades.
8-4. For cleaning finishes, use a soft brush or lint-free cloth to prevent scratching. A vacuum
cleaner brush nozzle can remove heavier dust. Remove surface smudges or accumulated
dirt and dust using a mild detergent and a slightly dampened cloth. You may use an
artistic agent, but never abrasive cleaning agents as they will damage the finish.
8 • Operating and Cleaning Your Ceiling Fan
42467-01 • 11/26/12 • Hunter Fan Company