Hunter 28129 Four-Light White Straight Arm Fitter - Manual (Page 2)

2
43558-01 • 05/18/09 • Hunter Fan Company
Table Of Contents
Installing the Light Kit on Fans With
Removable Switch Housing . . . . . . . . 4
Installing the Light Kit on Fans With
Non-Removable Switch Housing . . . 6
Installing the Light Kit on the Hunter
Original . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing Bulbs, Chain, and Shades . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 10
© 2009 Hunter Fan Company
Your new Hunter
®
light kit is an addition to your home or office that
will provide comfort and performance for many years. This installation
and operation manual gives you complete instructions for installing
and operating your light kit.
We are proud of our work. We appreciate the opportunity to supply
you with the best products available anywhere in the world.
Before installing your light kit, for your records and warranty assistance,
record information from the carton and Hunter nameplate label.
Cautions and Warnings
• READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING
INSTALLATION. SAVE THESE INSTRUCTIONS.
• Use only Hunter replacement parts.
• To reduce the risk of personal injury, install this light fixture only on
Hunter® fan types A through Z. Note: The fan type can be found on
the ceiling fan package or on the nameplate label located on top of
the motor housing of the ceiling fan.
• To avoid possible electrical shock, before installing light fixtures,
disconnect the power by turning off the circuit breakers both to
the outlet box and to its associated wall switch location. If you
cannot lock the circuit breakers in the off position, securely fasten a
prominent warning device, such as a tag, to the service panel.
• Connect house wiring to the fan before attaching the light fixture to
the fan.
• All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a
qualified electrician.
Welcome