CEMB USA K9 (B) - Manual (Page 3)

I 0672 - 3
PANNELLO E
DISPLAY
PROTEZIONE
RUOTA
CALIBRO
AUTOMATICO
MANDRINO
GB
1 - GENERAL
1. ► 1 - GENERAL SAFETY REGULATIONS
The machine should only be used by authorized and suitably trained personnel. ▪
Do not use the machine for purposes other than those specifi ed in this manual. ▪
The machine should not be modifi ed in any way except for those modifi cations explicitly carried out by ▪
specialised personnel.
Never remove the safety dehyvices. Any work on the machine should only be carried out by specialised
▪
personnel.
Carefully clean the coupling surfaces before performing any operation. ▪
Avoid using strong jets of compressed air for cleaning. ▪
Use alcohol to clean the plastic panel or shelves (AVOID LIQUIDS CONTAINING SOLVENTS). ▪
Before starting the wheel balancing cycle, make sure that the wheel is securely locked on the adapter. ▪
The machine operator should avoid wearing clothes with fl apping edges. Make sure that unauthorized ▪
personnel do not approach the machine during the work cycle.
Avoid placing objects inside the cabinet as they could impair the correct operation of the machine.
▪
1.1.1 - STANDARD SAFETY DEVICES ►
STOP push button for stopping the wheel under emergency conditions. ▪
The wheel guard is not compulsory since the balancing speed is less than 100 min ▪ -1.
1.2 - FIELD OF APPLICATION ►
The machine is designed for balancing wheels of cars, light commercial vehicles or motorcycles weighing less than 75
kg. It can be operated in a temperature range of 0° to + 45° C.
The following functions are provided: SPLIT; Unbalance optimisation; Autodiagnostics; Autocalibration.
1.3 - MAIN PARTS ►
1.4 - OVERALL DIMENSIONS ►
WHEEL GUARD
CONTROL PANEL
AND DISPLAY
SHAFT ASSEMBLY
AUTOMATIC GAUGE