CEMB USA K9 (B) User Manual
Page 9
I 0672
- 9
FI
FE
GB
5
►
.2.3 -
EXACT POSITIONING OF THE ADHESIVE WEIGHT BY MEANS OF THE GAUGE WITH CLIPS
-
Press the button
if using the correction method with weights on the inside of the rim
▪
Fit the correction weight in the specifi c gauge seat with the
adhesive part facing upwards
▪
Bring the wheel into correct angular position for the plane to be
corrected.
▪
Pull the gauge further outwards.
▪
Return the gauge to the rest position.
▪
INSIDE CORRECTION POSITION
▪
OUTSIDE CORRECTION POSITION
▪
When the weight application distance has been reached a
beep is sounded (can be deactivated).
▪
rotate the gauge until the correction weight adheres to the rim
▪
the fact that the weight application position is no longer vertical
(see
fi gure) is automatically compensated
▪
to cancel this function, press
button again.