Ba d – CEMB USA C75 (C) User Manual

Page 16

Advertising
background image

I 0381 - 16

I 0381 - 17

10

b

a

d

GB

GB

5.3.2 - Manual presetting

If necessary, the dimensions can be inserted or edited in manual mode as follows:

- press

+

.

- press

to select the dimension to be preset (red).

- press

/

to preset the required value.

- press

to change unit of measurement.

- press

to preset the dimensions for the ALUS correction mode

Definition of dimensions for correction using spring weights:

d = DIAMETER:

Preset the nominal diameter stamped on the rim.

b = WIDTH:

Preset the nominal width indicated on the rim (see

STANDARD WHEELS)

.

a = DISTANCE:

Preset the distance of the inside of the wheel from the machine, after measuring

it with relative gauge as described in fig. 8.

In the event of correction type other than standard (spring weight), follow the instructions on the screen for correct
detection of dimensions.

Select

Unit

Advertising