CEMB USA C71_2 evo (D) - Manual (Page 3)

I 0637 - 3
1
GB
1 - GENERAL
1.1 - General safety regulations ►
The wheel balancer may only be used by duly authorized and trained personnel. ▪
The wheel balancer must not be used for purposes other than those described in the instruction manual. ▪
The wheel balancer must not be modifi ed in any way except for those modifi cations made ▪
explicitly
by the manufacturer.
Do not remove the safety devices. Any work on the machine must be carried out by specialised ▪
personnel
only.
Avoid using strong jets of compressed air for cleaning. ▪
Use alcohol to clean plastic panels or shelves (AVOID LIQUIDS CONTAINING SOLVENTS). ▪
Before starting the wheel balancing cycle, make sure that the wheel is securely locked on the fl ange. ▪
The machine operator must not wear clothes with fl apping parts. Do not allow unauthorized personnel to ▪
approach the wheel balancer when the cycle is running.
Avoid placing objects in the base which could impair the correct operation of the wheel balancing
▪
machine.
Before disassembling the weight shelf, remove the guard (see specifi c instructions) ▪
1.1.1 - Standard safety devices ►
Stop push button for stopping the wheel under emergency conditions. ▪
The wheel guard is not compulsory since the rotation speed is less than 100 min ▪ -1.
1.2 - Field of application ►
The machine is designed for balancing wheels of cars, light commercial vehicles or motorcycles weighing less than 75
kg. It can be operated in a temperature range of 0° to + 45° C.
1.3 - Overall dimensions ►
1.4 - Technical data ►
Single-phase power supply 230 V - 50/60 Hz (on request 115 V)
Protection class IP 54
Max. power absorbed 0,8 KW
Cycle time for average wheel (15 kg (5 3/4"x14") 4,7 seconds
Balancing speed < 100 min -1
Max. resolution of measurement 1 gram
Position resolution ± 1.4 °
Average noise < 70dB (A)
Rim-machine distance 0 - 298 mm
Rim width setting range 1.5” - 20” or 40 - 510 mm
Diameter setting range 10” - 30” or 265 - 765 mm