CEMB USA T1-38 T1-38BF T1-38V - Manual (Page 2)

B A L A N C I N G M A C H I N E S
Principle of operation
The transducers of this series supply a signal proportional to the velocity of vibration of the point where they are fixed.
A voltage proportional to the velocity of vibration is induced in a coil that moves in a field generated by a permanent magnet.
The coil is suspended seismically on the body of the transducer which is fixed to the measuring point.
The transducer is normally connected to a vibration monitoring unit. This creates a measuring chain able to detect the vibrations
of any rotating machine. The most frequent applications regard motors, pumps, fans, compressors, turboalternators, etc.
considered strategic in any manufacturing cycle. Various models are available according to the different fields of application;
the transducer should be chosen on the basis of the frequency response, direction of measurement, type of material of the
outer case, temperature range or application in a classified area. Each transducer is designed with characteristics to suit the
industrial environment and is provided with a connector to MIL standards or integral teflon cable, with high degree of protection
against atmospheric agents. Installation is very easy and can even be carried out under normal working conditions.
Overall dimensions drawing 1
Overall dimensions drawing 2
Overall dimensions drawing 3
Typical applications