CHIEF NW2 Series - Manual (Page 10)

NW2F8-12 Installation Instructions
10
Completing Installation
1. Hang rack over top rail of mounting plate. (See Figure 13)
2. Fasten rack from below to mounting plate using two
10-32 x 1/2" security buttonhead screws (K). (See
Figure 13)
Figure 12
Figure 13
DANGER: IMPROPER WIRING CAN LEAD TO DEATH
OR SEVERE PERSONAL INJURY! Grounding must be
installed by qualified personnel using a UL Recognized No.
12AWG Green and Yellow grounding wire connected to
grounding lug on rack.
LOADING THE RACK
NOTE: The alignment panels shipped with the racks are
optional. They may be removed to facilitate loading of
the racks.
Load Distribution
CAUTION: BEGIN PLACEMENT OF LOAD AT BOTTOM
OF RACK! Load rack, moving from bottom toward top of rack.
Loading rack incorrectly may result in instability causing
possibly injury and/or damage to components.
1. Begin placement of components into the rack at the lowest
point.
(back view)
(K) x 2
(inside view of door)
Grounding screw and nut
installed at factory
affixed adjacent to grounding terminal.
Earthing symbol IEC 60417 No. 5019
Location of
grounding
lugs Location of
grounding
lugs
(front view of rack)