CHIEF ECRR Series - Manual (Page 6)

ECRR Series Installation Instructions
6
10. Use two M7x70mm confirmat screws (Q) to secure back
support (F) to rack bottom (D). (See Figure 5)
11. Press two caps (T) onto two confirmat screws (Q). (See
Figure 5)
Figure 5
12. Use two #10- x 5/8" wood screws (R) to secure each brass
hinge (J) to side panel (A or B). (See Figure 6)
NOTE: Door can be attached to either side panel based on
user preference.
Figure 6
13. Slide front door (W) into brass hinges (J). (See Figure 7)
14. Tighten screws on brass hinges (J) to secure door to
hinges. (See Figure 7)
15. Install two bookcase studs (L) into holes on opposite side
panel. (See Figure 7)
Figure 7
16. Use four #5 x 3/8" flat head wood screws (G) to secure two
clip-on hinges (P) to back door (X). (See Figure 8)
Figure 8
10 (Q) x 2
11 (T) x 2
(J) x 2
(R) x 4 12
13
13
14
(L) x 2 15
(P) x 2
(G) x 4
(X)
16