D&D Technologies PullBolt lock - Side Mounting - Manual

24mm
(15/16")
83mm (3.1/4")
LOCK BODY
KEEPER
FRONT TEMPLATE
SIDE TEMPLATE
Keeper in
side
position
WALL, FRAME or POST
ALLOW 75mm (3") CLEARANCE
FOR HANDL
E
25mm(1")
AND 13mm (1/2") MAXIMUM GAP ALLOW
3
mm (1/8") MINIMUM GA
P
FACE OF FRAME THAT THE LOCK BODY IS MOUNTED TO FOR A LEFT-HAND OPENING
A
A
FACE OF POST THAT THE SIDE-MOUNT KEEPER IS MOUNTED TO
FACE OF FRAME FOR A RIGHT-HAND OPENING
D
E
D
E
25mm(1")
A
DRILLING TEMPLA
TE
PULLBOL
T SIDE-MOUNT MODEL
PULLB000029PA •Instr_D&DPullBolt_SM (20/6/05)
IMPOR
TANT
: If printing these Instructions
from an electronic file (e.g. website download), be sure to check that dimensions shown here measure correctly
, as differences in print-outs
may result in inaccurate template holes.