ALLIED Vision Technologies Prosilica GT6600 - Manual (Page 9)

Introduction
AVT Prosilica GT Technical Manual V2.1.0
9
Precautions
Caution

Do not disassemble the camera housing. Warranty is void if
camera has been disassembled.
This camera contains sensitive internal components.
Caution

Keep shipping material.
Poor packaging of the product may cause damage during
shipping.
Caution

Verify all external connections.
Verify all external connections in terms of voltage levels,
power requirements, voltage polarity, and signal integrity
prior to powering the device.
Caution

Cleaning.
This product can be damaged by some volatile cleaning agents.
Avoid cleaning the image sensor unless absolutely necessary.
Please see instructions on optics cleaning in this document.
Caution

Do not exceed environmental specifications.
See environmental specifications limits in the Specifications
section of this document. Special care must be taken to
maintain a reasonable operating temperature. If the camera
is operated in temperatures higher than the specified range,
the camera should be mounted on a heat sink.
For more information on camera body temperature:
http://www.alliedvisiontec.com/fileadmin/content/PDF/
Support/Application_Notes/AppNote_-
_Prosilica_GT_Body_Temperature.pdf