ALLIED Vision Technologies Prosilica GE4900 - Manual (Page 41)

Prosilica GE Technical Manual V2.0.3
41
Camera interfaces
Gigabit Ethernet port
The Gigabit Ethernet port conforms to the IEEE 802.3 1000BASE-T standard for
Gigabit Ethernet over copper. AVT recommends using Category 6 or higher com-
patible cabling and connectors for best performance.
www

The AVT GigE Installation Manual offers detailed instructions
for using Prosilica GE cameras.
http://www.alliedvisiontec.com/fileadmin/content/PDF/
Products/Technical_Manual/GigE_Install_Manual/
AVT_GigE_Installation_Manual.pdf
www

See Hardware Selection for AVT GigE Cameras application
note for a list of recommended Ethernet adapters
http://www.alliedvisiontec.com/fileadmin/content/PDF/
Support/Application_Notes/
Hardware_Selection_for_AVT_GigE_Cameras.pdf
Note

A standard Ethernet adapter is available for purchase from AVT:
AVT P/N: 02-3002A
Model: Intel Pro 1000/PT
Note

Cable lengths up to 100 m are supported.
The 8-pin RJ-45 jack has the pin assignment according to the
Ethernet standard (IEEE 802.3 1000BASE-T).
Cables with screw-lock connectors are available for purchase
from AVT:
http://www.alliedvisiontec.com/emea/products/accesso-
ries/gige-accessories.html
Note

Prosilica GE cameras support cables with horizontal locking
screw connector for a secured connection (See figure 28).
AVT recommends using locking-screw cables from Components
Express, Inc. for a perfect fit. Visit the
CEI product configurator
to customize the cable according to your needs.