ALLIED Vision Technologies Prosilica GE4900 - Manual (Page 45)

Prosilica GE Technical Manual V2.0.3
45
Camera interfaces
Out 2 and Out 3
Out 2 and Out 3 can be configured to active high or active low. The internal cam-
era signals are listed as follows:
Video iris
This signal can be used to drive the video input of a video iris lens.
Reserved
These signals are reserved for future use and should be left disconnected.
Exposing Corresponds to when camera is integrating light
Trigger Ready Indicates when the camera will accept a trigger signal
Trigger Input A relay of the trigger input signal used to “daisy chain” the
trigger signal for multiple cameras
Readout Valid when camera is reading out data
Imaging Valid when camera is exposing or reading out
Strobe Programmable pulse based on one of the above events
GPO User programmable binary output