Analog Way Eikos2 - Manual (Page 68)

68
8.3.9 Working with Mirror modes
3. Copy & H.pos Flip mode: Output #2 will be exactly the same as output #1 except the fact that the selected
layer will have its H position flipped (standard Mirror mode).
4. Copy & H.Flip all modes: Output #2 will be exactly the same as the output #1 except the fact that the se-
lected layer will have its H position and data flipped (only for live layers) .
OUTPUT #1 OUTPUT #1 OUTPUT #2 OUTPUT #2
OUTPUT #1
OUTPUT #1 OUTPUT #2 OUTPUT #2
NOTES:
• Remember to simplify the use of this feature, you need to manipulate Output #1. While in mirror mode,
Output #2 will follow.
• Every change on Output #2 will have an effect only on Output #2, but remember that if a change occurs on
Output #1 after that, Output #2 will update automatically to match output 1.