Analog Way Eikos2 - Manual (Page 69)

69
8.3.10 Working with frames/logos
8.3.10 Working with frames/logos
The frame/logo can be memorized from Output #1 or #2. To record a frame/logo, please refer to the chapter:
8.2.14 Capturing frames and 8.2.20 Capturing logos in the Mixer mode.
To use a frame/logo, refer to “Working with frame/logo”.
As a source, each frame/logo can be used by both outputs, you just have to select the correct matrix# button
first.
Quadravision mode allows the display of up to 4 live sources on a screen. The Preview will display just the
outline of each layer to show the position, size, and the source attached.
Choose Quadravision mode in the Mode menu, then choose your first template.
To use windows, first attach your source to the desired window, you have to use the windows button in the
Quadravision field.
Press W# button > Press input #
Press TAKE to apply the change on the main screen.
All windows have the same settings as layers in other modes. You can have access to them by the Layer menu
or directly by pressing the W# button once a source is attached. You always have access to the shortcut tran-
sition button/black button:
Press W# button > Press the Cut/fade/user1/user2/user3/user4 button to set up the transition
8.4 Settings in Quadravision mode
8.4.1 Working with templates
Some templates are available for the Quadravision mode, you will find them here:
Home menu > Quadravision layout
Templates are just here to provide some useful layer positions, you can adjust them manually at any time.
W 1
W 1
W 2
W 4
W 4
W 3
W 1 W 1 W 2
W 2
W 2 W 4
W 4
W 4
W 3
W 3
W 3
W 1
W 3
W 2
W 1
W 1
W 1
W 2
W 4
W 4
W 3
W 1 W 1 W 2
W 2
W 2 W 4
W 4
W 4
W 3
W 3
W 3
W 1
W 3
W 2
W 1
Win1 Full screen Win2 Full screen
Win3 Full screen Win4 Full screen