Analog Way Smart Edge FX User Manual
Page 30
28
4-2. THE STE200 MENU
To access the
STE200
menu, press the
[EXIT/MENU]
button in the control section (4). To highlight items in
the menu which will appear on the VFD screen (2), turn the scroll knob (4) left or right to the desired menu
item. When you have reached the desired menu item, press the
[ENTER]
button in the control section (3) to
access that menu function. Pressing the
[ENTER]
button (1) when a selection has been made sets the value
to that selection in the
STE200
memory. When all settings have been made, press the
[EXIT/MENU]
button
to exit sub-menus and return to the main menu.
* IMPORTANT * : simply selecting a menu item will not set it to that value. Be sure to press the [ENTER]
button when parametering the menu items.
Pressing the
[MENU]
button in the menu section of the
STE200
, will display and give you access to the
following items on the menu VFD screen:
- INPUT:
select to configure the 12 individual input types and resolutions.
- OUTPUT 1:
select to set the output types and resolutions of Output #1.
- OUTPUT 2:
select to set the output types and resolutions of Output #2.
- VIDEO OUT:
select to configure Video output card settings.
- PRESET:
select to store and use presets.
- AUDIO:
select to access all audio input and output parameters.
- CONTROL:
select to access device software information, LAN settings, reset factory settings, amongst
other user oriented functions.
Menu navigation
Home menu
2
1
3
4