Analog Way Smart Edge FX - Manual (Page 56)

54
The RCS software for your STE200 is composed of several easily identified sections.
The tabs menu (1) allows you to navigate through the equivalent of the STE200 front panel menu items (see
also “The STE200 Menu” p.28).
The green window of the RCS (2) represents your Preview window and can be used to parameter sources,
frames, layers and logos directly by clicking on the corresponding button, then navigating through the different
available tabs. The red window of the RCS (3) represents your Main window, and can also be used much like
the front panel of the STE200 . Create user presets directly in the RCS main window, by clicking on one of the
four available Preset icons (4) and setting up your preset in the Preview window.
Clear unwanted steps with the [CLEAR] button (5), reload a fresh copy of your screen via the [RELOAD MAIN]
button (6), make smooth takes directly with your mouse or trackpad with the virtual T-bar (7). The [TAKE]
button (9) will allow you to view any changes made to your preview screen on your main screen, Analog Way
engineers have even implemented a [STEPBACK] button (8) to quickly return to your previous setup in case
of a manipulation error (recall of Preset before [TAKE] ).
The status section (10) allows for easy monitoring of the connection status.
The RCS software for your STE200 can be viewed as the software version of the STE200 front panel menu
section. It allows you to quickly access all of the STE200 functions via a single page interface, and easily edit
your settings directly from your laptop or PC.
Before starting with the RCS software, you must establish a connection from your laptop to the STE200 you
wish to run.
Software overview
1
2
4
5
6
7
8
9
10
3