Datamax-O'Neil DPL Programmer’s Manual - Manual (Page 13)

Overview
5
Label Header Commands
These commands determine how the label formatting occurs, the print quality and
quantity. They are typically issued immediately following the <STX>L start of the label
format. The Format Attribute (A) and the Offset (C, R) commands can be changed at
any point between format records to achieve desired effects.
Label Header Command Name
A Set Format Attribute
C Column Offset
D
Set Width and Dot Size
H
Set Heat Setting
M
Set Mirror Mode
P
Set Print Speed
P
Set Backup Speed
Q Set Quantity
R Set Row Offset
S
Set Feed Speed