Aiwa XR-MS3 - Manual (Page 4)

4
ENGLISH
PREPARATIONS
1 Connect the speaker cords to the speakers.
Connect the cords with the white stripes to + terminals and
the other cords to – terminals.
2 Connect the speaker cords to the main unit.
The cords with the white stripes should be connected to the
terminals and the other cords to the terminals.
CONNECTIONS
Check your accessories
FM antenna AM loop antenna Remote control
Operating Instructions, etc.
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
• Connect the speakers, antennas, and all optional equipment
first. Finally, connect the AC cord.
• There are no differences between the front speakers. Both
speakers can be connected as L (Left) or R (Right).
AM loop antenna FM antenna
Right speaker Left speaker
AC cord
Speaker cord
to an AC outlet
1
2
1
4
3