AT&T 1460 User Manual
AT&T Handset Cordless Phone
Advertising
Table of contents
Document Outline
- CONTENTS
- BEFORE YOU BEGIN
- INSTALLATION
- TELEPHONE OPERATION
- TELEPHONE MEMORY
- TELEPHONE DIRECTORY
- CALLER ID OPERATION
- ANSWERING SYSTEM OPERATION AT THE BASE
- Audible Indicators
- Turn Answering System On or Off
- Set the Clock
- About Mailboxes
- About Announcements
- Record Your Announcement
- Answering System Feature Setup
- FEATURE SUMMARY
- Listen to Messages
- Adjust Playback Volume
- Delete Messages
- Record a Memo
- MESSAGE WINDOW DISPLAY
- Connect with the Answering System
- Voice Menu
- REMOTE ACCESS COMMANDS
- BATTERIES
- IN CASE OF DIFFICULTY
- TELEPHONE OPERATION
- If the phone doesn’t work at all, check these items first:
- If the above suggestions don’t solve the problem, try re-initializing handset and base:
- If you hear a two-beep signal when you try to use the handset:
- If the phone does not ring when you receive a call:
- If the NEW CALL light on the base does not go off after you review your Caller ID information in the call log:
- If you hear noise or interference when using the phone:
- If you hear other calls while using your phone;
- If you lose a call after changing channels:
- If you are unable to operate special telephone services or other equipment requiring touch tone signals:
- If messages are incomplete
- If you have difficulty hearing messages
- If the system does not answer after the correct number of rings:
- If CL appears in the Messages Window:
- If the system does not respond to commands from a remote touch tone phone:
- If your outgoing announcement isn’t clear:
- TELEPHONE OPERATION
- DEFAULT SETTINGS
- TECHNICAL SPECIFICATIONS
- INDEX
- IMAGES