DE DIETRICH C 230 Eco - Manual (Page 6)

6
C 230 ECO 20/02/09 - 300015144-001-C
4 Operating the appliance
4.1 Control panel
4.1.1 Control panel DIEMATIC-m3
„ Electromechanical components
1. General ON 8 / OFF 7 switch
2. Reset button
3. Flap
4. Timed circuit breaker (4 A)
5. Connector for the programming tool
6. Display

The panel must always be supplied with 230V voltage:
- to ensure the anti-grip of the heating pump,
- to ensure Titan Active System® operation when a titanium anode
is protecting the DHW tank.
Furthermore, if an interactive remote control (CDI 2) is connected
and the 1 switch is in the off
7 position, there will be no display on
the CDI 2.
Z
See: "Control panel instructions"
1 2
3
5
6
D000645
4