eLine Technology EYS-VMS eyStream User Manual Part3 - Manual (Page 46)

246
3. The minimum (maximum) speed of a moving object can be set using any of the following
methods:
Note
The first method lets you roughly configure the speed, and the second
method allows you to set the speed precisely.
a. Position the cursor on an end point of the arrow and hold down either mouse button
while you move the mouse. The length of the arrow will correspond to the minimum
(maximum) displacement of the object per second.
b. Use the arrows to set the minimum (maximum) speed of the object as percentages
of the frame per second. The dimensions of the arrow in the viewing tile can be
changed in a similar manner.
The minimum (maximum) speed of a moving object is now set.
Complete the following steps to set how an object appears in the area:
1. Click .
2. Choose how an object appears in the area: enters the area (crosses the area's borderlines)
or appears (doesn't cross the area's borderlines).
eLineTechnology.com 303.938.1133