Emtek Monolithic & Sectional Dummy Entry - Manual

Optional Dead
Bolt Collar
For Brass Only
Optional Dead
Bolt Collar
For Brass Only
2 - 1 / 8 " D ia .
B o r e s
2 - 3 / 8 "
o r
2 - 3 / 4 "
5 - 1 /2 " *
2-1/8" D ia.
Bores
2-3/8"
or
2-3/4"
N o less
than
4-1/2"
Installation Instructions-Tubular Monolithic Entry Set - Dummy
*
Marietta 6 style locks have 6” center
to center bore spacing.
Installation Instructions-Tubular Sectional Entry Set - Dummy
IN4-ENTSETDUMY REV. 03/26/08
IMPORTANT:
Do not remove screws
AFTER LOCK HAS BEEN INSTALLED
Tighten Set Screws with Allen Wrench
AFTER LOCK HAS BEEN INSTALLED
Tighten Set Screws with Allen Wrench