Emtek Keypad Deadbolt Locksets User Manual

Page 4

Advertising
background image

4

Fasten Latch using two #8 x 3/4” Wood Screws (item #6).

2. Remove Screws from Inside Trim Plate

1. Install Latch

How to Install

!

REMOVE INSIDE

CHASSIS FROM

TRIM PLATE BEFORE

INSTALLING THE

OUTSIDE TRIM.

THUMBTURN MUST

BE IN UNLOCKED

POSITION.

Unlocked

Locked

THE LATCH ASSEMBLY

MUST BE ORIENTED

AS SHOWN AND THE

BOLT MUST BE IN THE

RETRACTED POSITION

FOR INSTALLATION.

!

Crosshairs

at bottom.

Use a Phillips head screwdriver to remove screws (item #4c) shown below and detach

Inside Trim Plate from the Inside Chassis.

screws

(item #4c)

Advertising