EXP Computer CD Traveler Plus - Manual (Page 8)

- - 8
PARALLEL PORT ADAPTER CABLE:
• •
Parallel port connector:
Connect this connector to a computer (25 pin) parallel port (Printer port).
‚ ‚
CD-ROM drive connector:
Connect this connector to the back of CD-ROM drive (26 pin)
Figure 4
CD-ROM POWER
There are three power source options to choose to power the CD Traveler:
1. PCMCIA socket power direct
2. AC adapter
3. Battery.
However, you can use only AC adapter or batteries when the CD-ROM is
used with the Parallel Port connection or as a stand-alone CD player.
SELECTING THE POWER SOURCE
The POWER SOURCE SWITCH (as shown in
‚
of Figure 2) is for selecting
which power source to use.
PC Card (PCMCIA) interface
User can select power source form PC or DC/BATT.
Parallel Port interface
User selects power source from DC/BATT only.