Brooks Instrument SolidSense II - Manual (Page 7)

1-1
Section 1 Introduction
SolidSense II ® Series
Installation and Operation Manual
X-PR-SolidSense II-PT-eng
Part Number: 541B160AAG
July, 2011
1-1 Introduction
This manual covers the Brooks ® SolidSense II ® Series pressure
transducers as shown in Figure 1-1 below. Included herein is general
information, operating specifications, installation, removal instructions
and product warranty information.
This manual is organized into the following sections:
Section 1 - Introduction
Section 2 - Installation
Back Cover - Limited Warranty and Contacts
It is recommended that this manual be read in its entirety before
attempting to operate the Brooks SolidSense II Series devices.
Figure 1-1 SolidSense II Pressure Transducer Configurations