Symbols, English – Burkert Type 5470 User Manual

Page 6

Advertising
background image

4 - 5470 / MP05

G

ENERAL

N

OTES

english

Symbols

ATTENTION!

Indicates information which must be followed. Failure to do this could endanger your
health or the functionality of the device

• When planning the application of the device, and during its operation, observe the general technical

rules!

• Observe the relevant accident prevention and safety regulations applicable for electrical equipment

throughout the operation, maintenance and repair of the device; always switch off the voltage supply
before working on the system!

• Note that lines and valves must not be unscrewed from systems that are under pressure!

• Take suitable measures to prevent unintentional operation or impermissible impairment!

• If these instructions are ignored, no liability will be accepted from our side, and the guarantee on the

device and on accessories will become invalid!

Safety notes

In these Operating Instructions, the following symbols are used:

indicates a working step that you will have to carry out.

NOTE

Indicates important additional information, tips and recommendations.

If there are discrepancies, please contact immediately your Bürkert subsidiary or our customer service:

Bürkert Steuer- und Regelungstechnik, Service-department

Chr.-Bürkert-Str. 13-17, D-76453 Ingelfingen

Tel.: (07940) 10-111

Fax: (07940) 10-448

eMail: [email protected]

To ensure that the device will function correctly, and have a long service life, please comply with the
information in these Operating Instructions, as well as with the application conditions and additional data
given in the Type 5470 data sheet:

NOTE

Approvals such as Ex, UL, UR, CSA, DVGW etc., will be indicated on the rating plate, or
by a special label.

Advertising