Burkert Type 8611 User Manual
Page 43
43
ConfigurationLevel
MODE = SCV, 4 – 20, 0 – 10, 2P – T, 3P – T
MODE = PCV, 2P – T, 3P – T
DSPL
VALV
CODE
L / H *
)
L / H
*
)
END
END
PRZ
*
)
MIN
MIN
MAX
MAX
Setting of the control range
Enter code protection
The following operator actions are blocked if code protection is activated:
• Changing the controller parameters in manual mode under the
PARA menu
• Access to the configuration level
factory setting:
Upon delivery from the factory, the display in the
CODE menu is set to 0000. This means that the code pro-
tection is not activated. Switching to the configuration level is done without query of the code.
Open
**
)
Close
Open
**
)
Close
Back without store
Back without store
*
)
The display depends
on the control variable
set in the
MODE
**
)
Press the up arrow
key to open the
actuating element,
and the down arrow
key to close the
actuating element.
Enter
MIN
Store as
MIN value
Enter
MAX
Store as
MAX value
Fig. 25: Operating structure of the configuration level - 11 of 12
english
Type 8611