Burkert Type 8635 - Manual (Page 62)

60 - 8635
O
PERATING AND
C
ONTROLLER
F
UNCTIONS
➔ Select in the main menu the item ADDFUNCT.
➔ By pressing the MANUAL / AUTOMATIC key, you enter the supplementary menu.
➔ With the arrow keys, select the desired supplementary function.
➔ By pressing the MANUAL / AUTOMATIC key, you confirm addition of the supplementary function to
the main menu. The function is automatically marked with an asterisk (*).
➔ All marked functions are added to the main menu after confirmation of ENDFUNCT.
➔ In the main menu, enter the parameters for the supplementary functions.
Deletion of supplementary functions from the main menu
Addition of supplementary functions to the main menu
➔ ➔ ➔ ➔ ➔ 5 s To activate the configuration menu, press (in the process operating level) the
MANUAL / AUTOMATIC key for 5 seconds.
The configuration menu consists of a main and a supplementary menu. The main menu contains initially
the basic functions which are absolutely necessary for first commissioning. The supplementary menu
comprises supplementary functions which may be selected. It may be reached via the menu item
ADDFUNCT of the main menu. Specification of device functions and parameters is possible within the
main menu. If needed, the main menu may be extended by functions from the supplementary menu,
which can then also be specified.
➔ Select in the main menu the item ADDFUNCT.
➔ By pressing the MANUAL / AUTOMATIC key, you enter the supplementary menu.
➔ With the arrow keys, select a supplementary function marked with (*).
➔ By pressing the MANUAL / AUTOMATIC key, you confirm deletion of the supplementary function
(the asterisk (*) marking is deleted).
➔ After confirmation of ENDFUNCT, the supplementary function is deactivated and deleted from the main
menu.
NOTE By deletion of a function from the main menu, the settings previously made under this
function will become invalid.
Numeric values are set in the menu items provided by pressing the keys (increment value) or
(decrement value) one or more times. In the case of 4-digit numbers, only the flashing digit can be set
with the arrow keys. By pressing the MANUAL / AUTOMATIC key, you can switch to the next digit.
Setting of numeric values