Burkert Type 8635 - Manual (Page 89)

8635 - 87
O
PERATING AND
C
ONTROLLER
F
UNCTIONS
Displays in the operating mode AUTOMATIC
With respect to the controller, the following displays are possible:
• Actual position of valve actuator POS__XXX (0 ... 100 %)
• Setpoint position of valve actuator after or CMD__XXX (0 ... 100 %)
correction characteristic:
By pressing the arrow keys, you can switch between these 2 display options.
In the AUTOMATIC mode, the normal controlled operation is executed and monitored. The setpoint is
specified via the PROFIBUS PA signal.
Meaning of the keys in the operating mode AUTOMATIC
Operating mode AUTOMATIC (PROFIBUS PA)
Switch over the display or
If the device in the safety position (for the relevant configuration, see menu item BIN-IN),
the message SAFE XXX appears on the display.
NOTE
No operating
action.
AUTOMATIC
mode
MANUAL
mode
Release key
or
Switch over
display
POS__XXX
CMD__XXX