Burkert Type 8793 - Manual (Page 34)

34
Basicfunctions
7. BaSic functionS
7.1. overview of basic functions
The following basic functions are created as device menu items in the navigation area in the factory:
ACTUATOR 9) Inputting the operating mode of the pneumatic actuator
INPUT Entry of the standard signal for the set-point value
BUS.COMM Adjust the selection / parameters of the field bus interface
RESET Reset to factory settings
TUNE FUNCTIONS Automatic adjustment of the positioner / process controller to the relevant operating
conditions
Table 8: Basic functions
7.2. Basic functions - parameter
Parameterization and transfer of parameters are described in sections “6.5. Parameterization” and “6.4.
Transferring parameters”.
noTe!
if changes are made and transferred with the "write all parameters to device" function, it is possible that
parameters in the device will be unintentionally overwritten!
• Read the current device data before you make the changes or
• transfer only the modified parameters by using the selection options "Write directory only" or "Write directory
and subdirectories only".
Modified values can be transferred to the database with the Apply or OK
button. If you exit the function with the Cancel button, the changes are not transferred.
You can save the project with the "File / Save" menu item.
9)
Only for Types 8692 / 8693
English
Software Tool - 8x92 / 8x93