Burkert Type 8793 - Manual (Page 6)

6
Supplementaryoperatinginstructions
1. Supplementary operating
inStructionS
The supplementary operating instructions describe the communication software for positioner / process controller
TopControl and SideControl.
Safety information!
Safety instructions and information for using the device may be found in the corresponding operating
instructions.
• The operating instructions must be read and understood.
1.1. Symbols
Danger!
warns of an immediate danger!
• Failure to observe the warning will result in a fatal or serious injury.
Warning!
warns of a potentially dangerous situation!
• Failure to observe the warning may result in serious injuries or death.
CauTion!
warns of a possible danger!
• Failure to observe this warning may result in a moderate or minor injury.
noTe!
warns of damage to property!
• Failure to observe the warning may result in damage to the device or the equipment.
Indicates important additional information, tips and recommendations.
Refers to information in these operating instructions or in other documentation.
→
Designates a procedure which you must carry out.
English
Software Tool - 8x92 / 8x93