Burkert Type 8650 - Manual (Page 64)

64
3.2. Installation/Removal of the ET 200iSP-Modules
Installation
→
The ET 200iSP™ modules (terminal modules and bus termination modules) can be placed onto the profile rail
and latched to the AirLINE Ex System.
→
Modules, which are attached to the right supply segment, interlock with the supply segment.
Removal
→
Using a cross-head screwdriver, remove the unlocking slide (2) from the supply segment. This will release the
engaged module.
→
Push module to the right.
1
1
Clamping bolts 1
Unlocking slide 2
Fig. 6: Clamping bolts / Unlocking slide
Type 8650
english
Installation