Burkert Type 7616 - Manual (Page 10)

10
Installation
general Technical data 6.2.
Observe the technical specifications as specified on the
type plate!
Max. delivery pressure: 2.5 bar
(overpressure towards the atmospheric
pressure)
Connections: 3 x rectangular connector
3 x stranded wire 200 mm
(other designs on request)
Type plate 6.2.1.
example:
Housing material
Seal material
Voltage / Type of current
Output
Device designation
Serial number
Date of manufacture
(encoded)
Identification number of the
device
7616 CC PK
M
a
d
e
in
G
e
rm
a
ny
00202784 W16LP
DOSING UNIT
24V DC 5W
S/N 1050
Type
Rating plate description Fig. 1:
insTallaTiOn 7.
safety instructions 7.1.
Caution!
risk of injury from improper installation!
Installation may be carried out by authorised technicians only •
and with the appropriate tools!
Before loosening the lines and valves, turn off the pressure and
•
vent the lines.
Before reaching into the device or the equipment,
• switch off the
power supply and secure to prevent reactivation!
Observe applicable accident prevention and safety regulations
•
for electrical equipment!
preparatory work 7.2.
Clean the connecting cables
→
note!
Malfunction due to unfiltered medium!
Crystallised medium or particles in the medium impair the
functionality of the device or result in the unit being destroyed.
Install upstream filter.
→
(Pore size 50 µm)
english
Type 7616