Burkert Type 3005 - Manual (Page 26)

26
Installation
Auf Zu
N
-
Ph
+
1 2 3
T/E
Auf
N
-
Ph
+
3 2 1
T/E
Figure 17: Three points mode Figure 18: Open / Closed mode / Emergency current
model
If voltage is applied simultaneously to terminals 2 and 3, terminal 2 is the leading one and the actuator
moves to the OPEN position.
procedure:
→
Loosen left cable gland 15 (see “Figure 1” and “Figure 2”) and feed through the cable to be connected.
→
Connect cable according to the required control type (see “Figure 17” and “Figure 18”) to the terminal strip Pos.
B of the power supply card (see “Figure 15” and “Figure 16”).
Operating principle for Open / closed mode (see “Figure 18”) :
• Switch open = actuator closes
• Switch closed = actuator opens
connecting feedback
The limit switches for the feedback are suitable for a maximum voltage of 250 V AC/DC – 5 A.
The rotary actuator features two additional limit switch contacts which are supplied by the factory in an open position.
These can be used for the feedback of the rotary actuator.
2 3 1
FC2
FC1
FCF
FC0
4-6 5 7
=
C C
A
B
D
D
T/E
Motor
Feedback
Power supply and control
Figure 19: Internal wiring of actuator
English
Type 3005