Burkert Type 8112 - Manual (Page 22)

Note:
The mode setting on the NAMUR amplifier must be selected in such a
way that the switching output takes on safe condition in case of failure
(I ≤ 0.6 mA).
Level Signal current -
Sensor Control lamp
Falling characteris-
tics max. ≥ 2 .6 mA
Falling characteris-
tics max. ≤ 0 .6 mA
Rising characteris-
tics min. ≥ 2 .6 mA
Rising characteris-
tics min. ≤ 0 .6 mA
Malfunction any ≤ 0 .6 mA
flashes
22 LEVEL SWITCH 8112 • with NAMUR output
6 Set up
32052
-EN
-120418