CITIZEN iDP-3410 - Manual (Page 103)

iDP-3410 User’s Manual
ESC "2"
[Function] Setting the 1/6-inch line feed width
[Code] <1B>H <32>H
[Outline] This command sets the line feed width to 1/6 inch.
ESC "3"
[Function] Setting the line feed width in minimum pitch increments
[Code] <1B>H <33>H
[Outline] This command sets the line feed width to n/18 inch.
ESC "@"
[Function] Initializing the printer
[Code] <1B>H <40>H
[Outline] This command cancels various conditions set after power-on to initializes the printer to the
conditions having existed at power-on. However, the print buffer, input buffer, and external
device drive pulse width are not initialized. The settings of the DIP switch segments are not
re-read.