Preset jumper setting, Mode setting method – CITIZEN iDP-3410 User Manual
Page 31
iDP-3410 User’s Manual
6. PRESET JUMPER SETTING
6.1
Location of Preset Jumper
(1) Turn off the power.
(2) Remove a cassette ribbon.
(3) Remove the top cover. The preset jumper is located as shown in the figure below.
Serial Interface
Parallel Interface
6.2
Preset Jumper Table
Serial Interface
Mode
Location
CBM
STAR
ESC/POS
SCA
1-C *
2-C
2-C
SCB
1-C *
1-C *
2-C
SCC
1-C
2-C
*
SCD
1-C
2-C
*
SCE
1-C *
2-C
1-C *
SCF
1-C *
2-C
1-C *
SCG
1-C *
2-C
1-C *
SCH
1-C
2-C *
2-C *
* = Open
1-C * = 1-C or open
2-C * = 2-C or open
Parallel
Mode
Location
CBM
STAR
ESC/POS
SCA
1-C *
1-C
2-C *
SCB
1-C
1-C
2-C
SCC
1-C *
1-C *
2-C
SCD
1-C
1-C
2-C *
* = Open
1-C * = 1-C or open
2-C * = 2-C or open
7. MODE SETTING METHOD
This printer has the CBM, STAR, and ESC/POS mode. Any desired mode can be selected and set according
to your need.
(1) Setting method
•
See 5. DIP SWITCH SETTING.
•
Seeing the settings of the DIP switch 1-9 and 1-10 and those of the preset jumper, set each mode.