CITIZEN iDP-3410 - Manual (Page 46)

iDP-3410 User’s Manual
10 ESC ∗ n1 n2 Specifying the bit image mode 1BH 2AH n1 n2 60
11 ESC
−
n Specifying/Canceling the Underline 1BH 2DH n 60
12 ESC 1 Specifying 1/9-inch line feed rate 1BH 31H 61
13 ESC 2 Specifying 2/9-inch line feed rate 1BH 32H 61
14 ESC 3 Specifying 1/6-inch line feed rate 1BH 33H 61
15 ESC C n Setting the page length 1BH 43H n 61
16 ESC N n Specifying the perforation skip 1BH 4EH n 62
17 ESC O Canceling the perforation skip 1BH 4FH 62
18 ESC f 1 Form feed (Changing the page) 1BH 66H 01H 62
19 ESC t n Selecting the character code table 1BH 74H n 63
20 ESC BEL n1 n2 Setting the external device drive pulse width 1BH 07H n1 n2 64
21 BEL Driving command A for Drawer-1 07H 64
22 FS Driving command B for Drawer-1 1CH 65
23 SUB Driving command for Drawer-2 1AH 65
24 RS Buzzer-on 1EH 65
25 ESC R 1 Selecting the international character set 1BH 52Hn 66
26 ESC & 0 n1 n2 Defining the download character set 1BH 26H 00H n1 n2 67
27 ESC % n Specifying/Canceling download character set 1BH 25H n 68
28 ESC
⁄
n Definition the message 1BH 2FH n 68
29 ESC DC3 n Printing the message 1BH 13H n 69
30 ESC DC2 n1 n2
Deleting the download character, message, bit
image
1BH 12H n1 n2 70
31 GS ∗ n1 n2 Defining the download, bit image 1DH 2AH n1 n2 71
32 GS
⁄
m Printing the download, bit image 1DH 2FH m 72
13.1.2 Description of Items
XXXX
ALL
[Function] Command name
[Code] A row of command constituent code is represented by a hexadecimal number with < >H,
binary number with < >B, and a decimal number with < >. [ ]k means a repeat count of k-
times.
[Range] Describes an argument value (Setting range) for the command.
[Outline] Describes a command function.
[Caution] Describes a caution as required.
[Default] Describes an initial value for the command when accompanied by an argument.