Fluid Components International ST100 Series Configuration Software - Manual (Page 6)

ST100 Series Configuration Software
2 Fluid Components International LLC
Select the USB connect button at the top of the Welcome Screen.
The ST100 Configuration Application will open to the Process Data screen as shown below.
Process Data Screen
Configuration Menu
Percent of Range
Flow
Total Flow
Temperature
Group Number/Name
Alarm/Fault Indicators
The ST100 Process Data screen shows the same data available on the instrument LCD display.
• Percent of range scale located on the top of the screen
• Flow
• Total Flow (Mass or Volumetric units required)
• Temperature
• Calibration Group number and Group name
• Alarm and Fault indicators
The Configuration application is setup using a basic tree structure on the left side of the screen. The available configuration menus are listed:
ST100
• Process Data
• Basic Setup
• Advanced Setup
• Configuration
• Diagnostics
FE1
• Process Data