GF Signet 9900-1BC Batch Controller System - Manual (Page 13)

13 9900-1BC Batch Controller Manual
ENTER
! 1 2 3
Open Collector (R1) Indicator LED
Mechanical Relay (R2)
Indicator LED
Backlight Sensor
(do not block)
Warning LED
Bar Graph
Units of Measure
(GPM, sec, %, etc.)
Value
Label
Menu Indication
Menu Navigation Keys
Mechanical Relay (R3)
Indicator LED
Operation
ENTER
UP, DOWN keys
Scroll through Menu options or adjust values during editing.
Press both together to exit a menu or escape without saving.
RIGHT key
Select item or character to edit.
DOWN and RIGHT keys
Press both together to enable manual batch
or top off a previous batch. The valve will
open as long as the keys remained pressed.
ENTER key
Access menus
Save changes.